How to Tell If Your Plumbing Needs Repair

Plumbing is the system of pipes, fixtures, and appliances that conveys water (both clean and waste) throughout a home or building. Its importance extends beyond convenience – proper plumbing prevents waterborne diseases and improves living conditions.


Plumbers often collaborate with architects and construction teams to ensure that their systems integrate seamlessly into building projects. They also work in retail stores, restaurants, hospitals, and other commercial facilities. Contact Joe’s Plumbing for professional help.

Leaks waste water, damage your home, and encourage unwanted organic growth. The good news is that, if you catch them early enough, it is usually possible to prevent most types of water damage from occurring. However, it isn’t always easy to know if a leak exists since most of your plumbing is out of sight.

The average household loses about 17 gallons of water each day due to indoor leaks. Some of these are easy to identify, such as dripping faucets or a faulty water heater. However, many of these leaks go undetected for years unless you keep an eye on your water usage and bills.

As pipes age, they are more prone to develop leaks for a variety of reasons, including corrosion, damaged joints, and shifting soil. While a leak from a pipe may not seem like a big deal at first, it can cause significant damage over time, leading to sagging walls and ceilings, mold growth, and excessive moisture in the house.

Water pressure can also cause pipes to leak, especially if the force is consistently higher than recommended. This is because most pipes can only withstand a certain amount of force before they are pushed to the limit. If you notice a sudden drop in water pressure, have a plumber check your pipes for leaks.

Most of the time, a leak from a faucet is caused by worn or damaged seals. These seals are designed to create a tight barrier between the sink and other surfaces, such as countertops or walls. Over time, these seals can break down due to factors such as constant exposure to water and the use of cleaning products. This can lead to a leak and, over time, the surrounding area can become warped or stained.

A major sign that a pipe is leaking is a noticeable increase in your water bill without a corresponding rise in your usage. Other signs include wet or damp spots on the ceiling or walls, a musty smell around drains, or unexplained changes in water flow and pressure. While most leaks are the responsibility of the homeowner, leaks from the meter or pipes that run from the water main to your house are typically the responsibility of the water utility.

Damaged or Broken Parts

A professional plumber can help you identify signs of a damaged pipe and make repairs before the situation worsens. If you notice a metallic taste in your water or unexplained changes in your water color or pressure, this may indicate that the pipes are corroded or damaged. Other signs of damaged pipes include a sudden drop in water pressure, unusual odors coming from your drains and leaks around your home.

Plumbing parts and fixtures that are exposed to the elements can also break down over time. This is especially true for water pipelines that run throughout your property. If you don’t take steps to winter-proof your pipes, they can freeze and burst. Water pipelines are also susceptible to damage from sudden temperature changes. In fact, a 10-degree change in weather can cause water to expand and break pipes.

Another common cause of broken pipes is tree roots. If the root of a tree reaches your water or sewer line, it can cause serious damage. This can happen even if the roots aren’t touching the lines directly. If you have a large tree near your plumbing pipes, it’s a good idea to have it regularly inspected by a professional.

If you notice any of these signs, call a professional plumber immediately. He or she can perform a visual inspection of your plumbing system and determine if the damage is localized or widespread. If the damage is extensive, your plumber may need to cut out and replace the affected section of pipe. This is a job that requires the use of specialized tools and may require some excavation. Before doing any work, your plumber will shut off the water supply to the affected area, if possible. This will prevent further damage and allow the plumber to safely work on the pipes. Once the plumber has removed the damaged section of pipe, he or she will drain the remaining water in the line. Then, he or she will install the new pipe, using appropriate tools and materials. Depending on the type of pipe, this can involve soldering, gluing or threading.

Damaged Handle or Spout

A leaky faucet handle can waste a lot of water. In fact, one drip per second from a single faucet can waste more than 3,000 gallons over the course of a year! Replacing the handle is a quick and easy way to stop wasting water and money. In most cases, the new handle can simply be dropped into place. But first, the old handle must be removed and the internal components of the faucet must be checked for wear and tear, corrosion, or other damage. Our team can help identify the problem, find a replacement part, and reassemble everything correctly.

Unusual Noises

As homeowners, we tend to take our plumbing for granted until something goes wrong. When unusual noises like banging, groaning, whistling or hissing begin to sound through the walls from the plumbing system, it’s important to listen up – these sounds are your home’s way of telling you there is a problem. Thankfully, some of these strange noises can be fixed on your own with simple DIY steps, while others will require the help of a plumbing professional.

Banging sounds in your home’s plumbing typically indicate water flow or pressure problems. These can include water hammers and trapped air bubbles in the pipes. They often occur when you shut off a faucet or valve quickly. This sudden stop of the water velocity causes a shock wave that makes the pipes bang against one another.

A thudding sound in your walls is another common plumbing issue. This noise could be a result of the water pressure being too high, a loose or broken component or mineral deposits in the pipes. You can try to address this problem by adjusting the pressure or installing a pressure regulator.

Rattling and whistling sounds can be a sign of a number of issues in your plumbing, including low water pressure, a loose or faulty pipe joint or loose components. These problems should be addressed as soon as possible to avoid more serious issues.

Gurgling sounds from your drains are another indication of a problem in your plumbing. This may be a sign of a clog from leftover soap, food or other waste in your drain lines or a more serious blockage that requires the assistance of a plumber.

Whining or screeching sounds from your faucet can be caused by a worn washer or loose connections in the faucet system. You can try tightening these connections, but if the problem persists it’s best to contact your plumber. If the connections are tightened correctly, these sounds should go away. A plumber can also inspect the entire plumbing system for loose or damaged parts and install any necessary repairs.

Plumbers – What Do They Do?

Plumbers In Topeka Kansas install, repair and maintain gas and water pipes, bathtubs, showers, sinks, toilets, dishwashers and water heaters. They also inspect plumbing systems to identify issues, clogs and leaks.


They often work directly in people’s homes and must be comfortable with interacting with customers, explaining their repair options and providing estimates for services.

Backflow is a dangerous issue that can result in contamination of the public water supply. This occurs when the flow of water reverses in a plumbing system, drawing non-potable fluids such as pesticides and fertilisers into the drinking water line. This problem is easily prevented by having backflow prevention devices installed at critical points in a water system. Backflow preventers are required by the government to be installed at all properties with connections to the public water supply, including apartment buildings, restaurants and other commercial places.

Plumbers who specialise in backflow prevention know how to install and test these important devices. During the installation process, the plumber performs a backflow hazard assessment to determine the type of backflow prevention device that is needed for the property. The hazard rating is determined by the potential contaminants that could enter the drinking water supply from the property’s plumbing systems. Typically, properties with high backflow hazard ratings are fitted with testable backflow preventers that have valves that can be tested to ensure that they are working correctly. Low hazard properties can be fitted with non-testable backflow preventers that do not need to be tested.

There are many different types of backflow prevention devices. A common type is an air gap, which includes a check valve and a vacuum breaker that creates a physical break between the drinking water supply and any non-potable plumbing. A reduced pressure zone (RPZ) backflow preventer is designed to work in a similar way to an air gap, but has two check valves and a monitor chamber in between to check the pressure. This type of backflow prevention device is commonly used in commercial buildings and apartments, where there is a higher risk of contamination.

Another popular type of backflow preventer is the double check valve assembly, which has two check valves that are connected in parallel to each other. These devices are typically installed at the water meter to prevent water from being pushed back into the city water supply, and they can be used for both low and medium hazard properties. In some cases, this type of backflow prevention device may be required by law for certain types of property, including fire sprinkler systems.


Backflow testing is a crucial service that ensures your water supply is safe and clean. The service involves a plumber assessing how well backflow preventers work by checking their pressure levels. If they’re working properly, the backflow preventer device will keep untreated or contaminated water from being “back-siphoned” into your home’s clean water supply. However, if the valves fail, contaminant-filled water could enter your home and make you sick.

While it’s easy to assume that a backflow prevention system is sufficient, you need to make sure it works correctly. Your plumber will use a backflow testing kit to test the backflow preventer’s valves and gauges for any signs of problems. For example, they’ll check to see if the valves close when they should and if the air ports are opening up when they should. They will also take the time to look for any cracks or other damage to the device.

The testing process takes a while because the backflow preventer will have to be shut off while your plumber opens and closes the valves on it. They’ll also be testing the gauges, so they may need to stay on site for a few hours. The good news is that the testing services are usually covered by insurance, so you shouldn’t have to pay extra for it.

If you have a high-hazard property, you’ll need to have your backflow device tested at least once a year. Your plumber will carry out a backflow hazard assessment to determine whether your property is classified as low, medium or high-risk. Your plumbing contractor will then install the proper backflow device for your property.

Getting backflow prevention certification is an excellent way for plumbers to show their commitment to the industry and build trust with clients. It’s also a great way to stand out from the competition, as it shows that you understand and can handle an issue that could potentially be very dangerous for people.